Publicité
Please note: Once the function has started, you can
change the temperature or the grill level by pressing
or by turning the knob directly.
DURATION
When the
icon flashes on the display, use the
adjustment knob to set the cooking time you require
and then press
to confirm.
You do not have to set the cooking time if you want
to manage cooking manually: Press
and start the function. In this case, you cannot set the
end cooking time by programming a delayed start.
Please note: You can adjust the cooking time that has been
set during cooking by pressing
the hour and press
to confirm.
SETTING THE END COOKING TIME/DELAYED START
In many functions, once you have set a cooking time
you can delay starting the function by programming
its end time. Where you can change the end time, the
display will show the time the function is expected to
finish while the
icon flashes.
If necessary, turn the knob to set the time you want
cooking to end, then press
the function.
Place the food in the oven and close the door: The
function will start automatically after the period of
time that has been calculated in order for cooking to
finish at the time you have set.
Please note: Programming a delayed cooking start time
will disable the oven preheating phase: The oven will
reach the temperature your require gradually, meaning
that cooking times will be slightly longer than those
listed in the cooking table.
During the waiting time, you can use the knob to
change the programmed end time.
Press
or
to change the temperature and cooking
time settings. Press
to confirm
: Turn the knob to change
to confirm and start
to confirm when finished.
3. ACTIVATE THE FUNCTION
Once you have applied the settings you require, press
to activate the function.
You can press and hold
function that is currently active.
4. PREHEATING
Some functions have an oven preheating phase: Once
the function has started, the display indicates that
the preheating phase has been activated.
Once this phase has finished, an audible signal will
sound and the display will indicate that the oven has
reached the set temperature.
At this point, open the door, place the food in the oven,
close the door and start cooking by pressing
Please note: Placing the food in the oven before
preheating has finished may have an adverse effect on
the final cooking result.
Opening the door during the preheating phase will
stop pause it.
The cooking time does not include a preheating phase.
You can always change the temperature you want the
oven to reach using the knob.
5. END OF COOKING
An audible signal will sound and the display will
indicate that cooking is complete.
To extend the cooking time without changing the
settings, turn the knob to set a new cooking time and
press
.
6. 6
SENSE FUNCTIONS
TH
SMART CLEAN
To activate the "Smart Clean" function, with the oven
cold, distribute 200 ml of water on the bottom of the
oven cavity, then close the oven door.
Access special functions
select
from menu. then press
Press
to start immediately the cleaning cycle, or
press
to set the end time/start delayed.
At the end of the cycle, let the oven colling down
and remove any residual water in the oven and start
cleaning using a sponge moistened with hot water
(cleaning could be compromised if delayed by more
than 15 minutes).
Please note: The duration and temperature of cleaning
cycle cannot be set.
at any time to pause the
.
and turn the knob to
to confirm.
Publicité
