Publicité
FIRST TIME USE
1. SET THE TIME
You will need to set the time when you switch on the
oven for the first time.
The two digits for the hour will start flashing: Turn the
knob to set the hour and press
The two digits for the minutes will start flashing. Turn
the knob to set the minutes and press
Please note: To change the time at a later point, press and
hold
for at least one second while the oven is off and
repeat the steps above.
You may need to set the time again following lengthy
power outages.
2. SETTINGS
If required, you can change the default rated current (16
A).
Turn the selection knob to select the rated current,
then press
to confirm.
Please note: The oven is programmed to consume a level of
electrical power that is compatible with a domestic network
DAILY USE
1. SELECT A FUNCTION
When the oven is off, only the time is shown on the
display. Press and hold
the rotary knob to view the main functions available
on the left-hand display. Select one and press
To select a sub-function (where available), select the
main function and then press
to the function menu.
Turn the rotary knob to select from amongst the
subfunctions available on the right-hand display and
then press
to confirm.
to confirm.
to confirm.
to switch the oven on. Turn
to confirm and go
that has a rating of more than 3 kW (16 A): If your household
uses a lower power, you will need to decrease this value (13 A).
Please note: To change the rated current at a later point,
press and hold
is off and repeat the steps above.
3. HEAT THE OVEN
A new oven may release odours that have been left
behind during manufacturing: This is completely
normal.
Before starting to cook food, we therefore
recommend heating the oven with it empty in
order to remove any possible odours. Remove any
protective cardboard or transparent film from the
oven and remove any accessories from inside it. Heat
the oven to 200 °C for around one hour, ideally using
a function with air circulation (e.g. "Forced Air" or
"Convection Bake").
Follow the instructions for setting the function
correctly.
Please note: It is advisable to air the room after using the
appliance for the first time.
2. SET THE FUNCTION
After having selected the function you require, you
can change its settings. The display will show the
settings that can be changed in sequence.
.
TEMPERATURE / GRILL LEVEL
When the °C icon flashes on the display, turn the
knob to change the value, then press
and continue to alter the settings that follow (if
possible).
You can also set the grill level (3 = high, 2 = medium,
1 = low) at the same time.
for at least five seconds while the oven
to confirm
Publicité
