Publicité
Chapter 8
Radio Enable and Disable
This feature allows you to enable or disable a radio remotely.
For example, you may disable a stolen radio to prevent unauthorized users from using and enabling the radio
when it is recovered.
8.1
Initiating Radio Enable
Your dealer can set up the One Touch Access button to send a radio enable command to the desired
subscriber ID.
Procedure:
1. Select the channel that you want to send the radio enable command.
2. Press the programmed One Touch Access button.
Result:
If the radio enable is successful:
●
A positive indicator tone sounds.
●
The target radio resets.
If the radio enable is unsuccessful:
●
A negative indicator tone sounds.
8.2
Initiating Radio Disable
Your dealer can set up the One Touch Access button to send a radio disable command to the desired
subscriber ID.
Procedure:
1. Select the channel that you want to send the radio disable command.
2. Press the programmed One Touch Access button.
Result:
If the radio disable is successful:
●
A positive indicator tone sounds.
●
The target radio blinks green then red LEDs once and the radio is disabled.
●
The radio does not respond to user input and is not able to receive or transmit audio.
●
Power cycling the radio does not change the radio status.
If the radio disable is unsuccessful:
●
A negative indicator tone sounds.
MN010575A01-AA
Chapter 8: Radio Enable and Disable
25
Publicité
