Publicité
MN010575A01-AA
Chapter 9: Radio Check
Chapter 9
Radio Check
This feature allows you to determine if another radio is active in a system without disturbing the user of that
radio.
9.1
Initiating and Receiving Radio Check
Your dealer can set up the One Touch Access button to send a radio check command to the desired
subscriber ID.
Procedure:
1. Select the channel that you want to send the radio check command.
2. Press the programmed One Touch Access button.
Result:
If the radio check is successful:
●
A positive indicator tone sounds.
●
The target radio blinks green then red LEDs once and your radio remains muted.
If the radio check is unsuccessful:
●
A negative indicator tone sounds.
26
Publicité
