Publicité
MN010575A01-AA
Chapter 4: Zone and Channel Selections
Chapter 4
Zone and Channel Selections
A zone is a group of channels. You can program each channel with different features that support different
groups of users.
Table 4: Number of Supported Zones and Channels
Zone
4
4.1
Selecting Zones
Procedure:
Press the programmed Zone Toggle button.
Result:
Your radio shows the following indications:
●
When you switch to Zone 1, one beep tone sounds.
●
When you switch to Zone 2, two beep tones sound.
●
When you switch to Zone 3, three beep tones sound.
●
When you switch to Zone 4, four beep tones sound.
4.2
Selecting Channels
Your radio supports up to 64 channels. Each channel can be programmed with different features that support
different groups of users. The radio supports up to four zones, each with 16 channels.
Procedure:
Select channels by rotating the Channel Selector knob.
Your radio indicates the channel number or the programmed channel number through a voice
announcement. If the channel is not programmed, an error tone sounds.
NOTE: The radio sounds the voice announcement if the feature is enabled through Customer
Programming Software (CPS).
20
Channels
64
Publicité
