Publicité
Function
RX Noise Cancellation
TX Noise Cancellation
Enhanced Audio Power
On/Off
Sticky Monitor On/off
Battery Saver On/Off
2.2
Radio LED Indications
The LED Indicator shows the operational status of your radio. A qualified technician can permanently disable
the LED indication through a specific configuration.
Table 3: LED Indication
Indication
Solid Red
Solid Green
Blinking Green
Blinking Red
Solid White
Blinking White
Description
Allows you to turn on and off the receiving noise cancellation feature.
Allows you to turn on and off the transmitting noise cancellation feature.
Allows you to turn on and off the enhanced audio power setting for the
current channel. The speaker is set to operate at the highest speaker
power limit when enhanced audio power is turned on.
Allows you to monitor a selected channel for all radio traffic until function is
disabled.
Allows you to enable or disable the battery saver feature.
Status
The radio is transmitting.
The radio is receiving a signal.
The radio is scanning.
The battery capacity is low.
The radio is charging through USB-C. LED turns off when USB-C charg-
ing completes.
USB-C charging fault.
MN010575A01-AA
Chapter 2: Radio Overview
11
Publicité
