Publicité
MN010575A01-AA
Chapter 13: Scan
Chapter 13
Scan
Your radio scans through the programmed scan list for the current channel looking for voice activity when you
start a scan.
Your radio also performs a dual-mode scan. If you are on a digital channel, and your radio locks onto an
analog channel, your radio automatically switches from digital mode to analog mode during the call. If you
are on an analog channel, and your radio locks onto a digital channel, your radio automatically switches from
analog mode to digital mode during the call.
Table 5: Scan Types
Type
Home Channel Scan (Man-
ual)
Auto Scan (Automatic)
If you press the PTT button while the radio is scanning, radio transmits on the current channel, home
channel, previously selected channel, or the designated channel based on the scan list settings.
13.1
Priority Scan
Priority Scan allows the radio to automatically receive transmission from channels with higher priority. If you
want to prioritize a channel, you can enable the Priority Scan feature through the Customer Programming
Software (CPS).
13.2
Turning Scan On or Off
Procedure:
Press the programmed Scan button.
Result:
If Scan is enabled:
●
A positive tone sounds.
●
The green LED blinks.
If Scan is disabled:
●
A negative tone sounds.
●
The green LED extinguishes.
NOTE: If the auto scan feature is enabled, the radio does not allow you to turn on or off the channel
scanning feature using the programmed Scan button.
30
Description
Your radio scans all the channels in your scan list assigned to the home
channel.
Your radio automatically starts scanning when you select a channel or
group that has Auto Scan enabled.
Publicité
