Publicité
Chapter 5
Calls
Depending on the type of call, you can make, receive, and respond to calls in both Conventional Analog and
Digital mode.
5.1
Group Calls
Group Calls are calls from an individual radio to a group of radios. To communicate in a group, your radio
must first be configured as a part of the talkgroup.
5.1.1
Making Group Calls
Procedure:
1. To select a channel with an active group ID, rotate the Channel Selector knob.
2. To call, press the PTT button.
3. Wait for the Talk Permit Tone to end, and speak into the microphone.
NOTE: If the selected channel is busy, a busy tone sounds. Your radio is unable to make a call.
4. To listen, release the PTT button.
If your radio does not detect voice activity for a predetermined period, the call ends.
5.1.2
Responding to Group Calls
When you receive Group Calls, your radio shows the following indications:
●
The green LED illuminates.
●
Your radio unmutes and the incoming call sounds through the speaker.
Procedure:
1. To respond, press the PTT button.
2. Wait for the Talk Permit Tone to end, and speak into the microphone.
3. To listen, release the PTT button.
5.2
Private Calls
Private Calls are calls from an individual radio to another individual radio.
MN010575A01-AA
Chapter 5: Calls
21
Publicité
