Symphony Standard Card: Operation - Medela Symphony Mode D'emploi

7. Expression
Note
26
l Always disconnect the Symphony from
the power source after expression.
i
Info
l The program stores the last vacuum
setting in the stimulation phase.
l For the Standard program:
Press the "Let-down" button
revert from the expression phase to the
stimulation phase if necessary. If milk
has not begun to flow after two
successive stimulation phases, you
should take a break and try again in
15–30 minutes. Also, you could try
breast massage and then pump using
the expression phase.
l If the pump has been running for
30 minutes without any manipulations
(e.g. adjustment of the vacuum), the
Symphony will automatically switch off.
7.2 Symphony Standard card:
1
to
Press the On/off button
switch on the breast pump.
The Standard program will auto-
matically start with the stimulation
phase after pressing the On/off
button.
4
Set the comfort vacuum for the
expression phase (see chapter
7.3). The bars on the display show
the vacuum level. The more bars,
the stronger the vacuum.
Operation
to