Adapter Plate For 0.2 Ml Tubes Or 96 Well Pcr Plates - StarLab Mixer HC Manuel D'utilisation

5.2.3 Adapter plate for 0.2 ml tubes or 96-well PCR plates
1. Remove the lock washers (4) from the short screws in the exchangeable thermoblock.
2. Remove the short screws.
3. Connect the adapter plate (2) to the MTP thermoblock (3) using the long screws (1).
4. Secure the screws from below using the lock washers.
The lock washers prevent the screws from falling out of the bores if the exchangeable
thermoblock is not fixed on the unit.
5. Place the adapter plate on the device with the MTP thermoblock.
6. Tighten the screws.
18
· Mixer HC · User Manual
1
2
3
4