Installation; Preparing Installation; Selecting Location; Installing The Unit - StarLab Mixer HC Manuel D'utilisation

4

INSTALLATION

4.1 Preparing installation

Retain all packaging for subsequent safe transport or storage.
Check the completeness of delivery according to 2.2 Delivery Package.
i
Check all parts for any damage during transit.
i

4.2 Selecting location

Select a location for the Mixer HC in accordance with the following criteria:
• Mains power connection (230 V/120 V) as per device identification plate, located on
the rear of the device.
• At least 10 cm away from other equipment and walls.
• Solid bench with stable, even work surface.

4.3 Installing the unit

Warning! Damage due to incorrect power supply.
Only connect the unit to power sources that match the electrical specifications on
i
the device's nameplate.
Use only sockets with proper electrical grounding.
i
1. Place the Mixer HC on a suitable work surface so that the ventilation slots on the base of
the unit are not blocked.
2. Connect the power cable supplied to the mains connection socket (5, Fig. 1) of the Mixer
HC and the power supply.
3. Switch on the Mixer HC using the mains switch (7, Fig. 1).
4. Fit the exchangeable thermoblock to the thermosocket (2, Fig. 1).
14
· Mixer HC · User Manual