Programmable Temperature Control - StarLab Mixer HC Manuel D'utilisation

5. Briefly press the "INTERVAL MIX" key.
The sign flashes on the display.
6. Using the "TIME" arrow keys, set the pause phase.
7. Press the "START/STOP" key to start the interval function.
The unit begins to alternate between mixing and mixing pause until the total time has
elapsed.
8. To terminate the function before the time is up, hold the "INTERVAL MIX" key for more
than 2 seconds.
The indicator lamp goes out and the display shows Off
5.5.7

Programmable temperature control

The function "Programmable temperature control" enables a program run which consists of up
to two steps. The second step will automatically start after the first step has been completed.
1. Hold the "PROGR." key for more than two seconds.
The red indicator lamp in the key lights up. On the display the sign appears to the left of
the temperature display.
2. Using the arrow keys, set the parameters. The interval mixing function can be used in
addition.
3. Briefly press the "PROGR." key.
On the display the
the second stage of the program.
4. Using the arrow keys, set the parameters. The interval mixing function can be used in
addition.
5. Press the "START/STOP" key to start the program.
The program step which is currently visible on the display is now started. If it is the first
step, the second step is automatically started after the first step has been completed.
22
· Mixer HC · User Manual
sign appears to the left of the temperature display. You are now in
.