Morningstar RELAY DRIVER Manuel D'installation, D'utilisation Et D'entretien page 8

2.0 PC Software Installation
2.1 Installing MSView
Morningstar MSView is an all-inclusive software package that provides
programming, graphing, and logging capabilities for supported
Morningstar products. MSView is also used to configure and program
the Relay Driver.
This section details software installation by download of the latest
version of MSView from our website.
Step 1
Visit: http://www.morningstarcorp.com/products/software
Follow the page instructions to download the latest version of MSView.
Save the file to a convenient location such as the Windows Desktop.
Step 2
Find the saved file downloaded in step 1. Run the setup file and follow
the Wizard instructions.
Step 3
After the install is complete, you can delete the setup file or save it in a
safe place on your hard drive for future use.
NOTE: If an older version of MSView is already installed, the
setup program will automatically replace the older version.
RELAY DRIVER 8 | P a g e