Morningstar RELAY DRIVER Manuel D'installation, D'utilisation Et D'entretien page 40

Step 1
Save the configuration to a file. This step is not required, but it is
advised that the configuration be saved to a file so that it can be
retrieved and referenced at a later date.
a. Click Write to File
b. Choose a folder on the PC (or create one)
c. Type a name for the file
d. Click Save
Figure 16. Connecting the Relay Driver to a PC
Step 2
Using the included 6 ft serial cable, connect the Relay Driver to an
open serial port on a PC as shown in Figure 16.
RELAY DRIVER 40 | P a g e