Publicité
3.2.1 Disabled (Input) Function
The Disabled (Input) Function disables the relay driver of a channel.
This Function is the "safe" configuration for a channel that is not in use.
Disabled channels can be safely used as voltage inputs as well. The
channel voltage can be used as a Control Variable for other Functions.
Common Applications
Setup
1. From the Relay Driver setup screen (as shown in Figure 2), choose
the Simple setup button next to the desired channel
2. Select Disabled (Input) from the Function list. Click Finish
The channel is now configured for Disabled (Input) mode and the
channel's relay driver has been disabled. The channel may be used as
a voltage input if required. The Relay Driver Setup screen should
display "Disabled" in the Configuration Summary for the channel.
Unused channel
Measure external voltages and signals
RELAY DRIVER
12 |
P a g e
Publicité
