Publicité
3.2.3 Alarm / Fault Function
The Alarm/Fault Function activates a channel in response to a
fault or alarm generated by a Morningstar device. Any
combination of available faults and/or alarms from a
Morningstar Device can be monitored simultaneously. When a
Fault or Alarm occurs, the configured channel will turn on.
NOTE: Each channel configured with the Alarm/Fault
Function can only monitor the alarm/fault conditions
of one device on the Meter Bus network.
Common Applications
Set audible or visual indicators when an alarm or fault occurs
in a Morningstar Device
Signal other electronic equipment when an alarm or fault
occurs in a Morningstar Device
Setup
1. Starting from the Relay Driver setup screen (as shown in
section 3.1), choose the Simple setup button next to the
desired channel.
RELAY DRIVER
22 |
P a g e
Publicité
