Publicité
Relay Driver. If you are unsure which port is connected, consult the PC
user manual. The most common ports are COM1 and COM2.
The factory default Relay Driver Address is nine (9). After both
parameters are set, click Next > to continue.
Figure 19. Relay Driver Programming status
Step 6
MSView will attempt to communicate with the Relay Driver. If there is a
problem with the serial connection or communications parameters, an
error message will appear. Check the cable and be sure the correct
43 |
P a g e
M O R N I N G S T A R C O R P O R A T I O N
Publicité
