Publicité
3.2.2 Threshold Function
The Threshold Function switches a channel on or off according to a
high threshold setpoint and a low threshold setpoint. When a Control
Variable reaches either of these setpoints, the Function switches a
channel on or off. Additionally, delays and minimum/maximum timers
can alter behavior. A variety of control variables may be used including
voltage, current, and temperature values.
Common Applications
Setup
1. Starting from the Relay Driver setup screen (as shown in
13 |
P a g e
Load control (Low Voltage Disconnect/Reconnect)
Thermostat
Alarm signal
Figure 2), choose the Simple setup button next to the desired
channel.
M O R N I N G S T A R C O R P O R A T I O N
Publicité
