Publicité
3.2.4 GenStart Function
Configure one or more channels to control a generator. With the
flexible parameters of this Function, the user can control 1, 2, or 3-wire
schemes. Refer to the generator documentation for required signals,
timing, and operating specifications.
These instructions only provide a brief setup overview. Refer to the
Relay Driver GenStart Supplement for detailed wiring and configuration
details. The document is available on our website at:
https://www.morningstarcorp.com/wp-content/uploads/technical-doc-
relay-driver-applications-guide-en.pdf
WARNING: Remote generator control should only be
configured and installed by experienced professionals.
WARNING: Incorrect configuration or incorrect installation may
result in damage to the generator and/or other system
components.
CAUTION: Configure the Relay Driver first before wiring the
generator control.
Common Applications
Control a generator
RELAY DRIVER
28 |
P a g e
Publicité
