Publicité
Choose the appropriate Control Type. Click Next > to continue.
Figure 12. Specify generator signals
4. Up to 3 channels can be configured to control a generator. The
requirements vary between generator models/brands. Refer to the
generator's documentation for required start/stop signals. Check the
box next to each signal that is required to start/stop the generator.
Assign a wire (channel) for each signal. Signals can be combined on
the same channel to achieve the required timing diagram.
31 |
P a g e
M O R N I N G S T A R C O R P O R A T I O N
Publicité
