Publicité
CAUTION: The input voltage must be less than or equal to the
Relay Driver power voltage.
5.1.4 Driving Small Loads
Figure 256. Driving a small load ( > 750 mA )
The Relay Driver can sink up to 750mA per channel. In some cases,
the user may wish to drive a device directly as shown in Figure 26,
above. Possible devices include LED indicators, buzzers, and small
motors. The device may be powered by the Relay Driver power source
PWR
CH1
CH2
CH3
CH4
Ground
RELAY DRIVER
V+
(68Vdc Max)
4 Amp
54 |
P a g e
Publicité
