Publicité
4.7
Installing the cable duct
The control cables between the drain body of the Aqualift
L and the control unit are routed and installed in a cable
duct.
Use max. 45° bends for changes in direction.
The air hose must be routed with a continuous rising gra-
dient.
The connection of the electric cables is explained in the
enclosed control unit instructions.
4.8
Installing the control unit
Install the control unit in accordance with the instructions enclosed with the unit.
Safely lay all cables of the electrical components.
4.8.1
Control units for the Aqualift L
The following installation and operating instructions are supplied depending on the version.
Operating voltage
230 V
400 V
The system's control units must be positioned in such a way as to prevent any unauthorised use.
Consequential damage can occur in the building if the system is switched off accidentally.
016-880
Installation and operating instructions
016-207 Connect 230V Mono/Duo control unit
016-306 Connect 400V Mono/Duo control unit
Installation and operating instructions
37 / 148
Publicité
