Publicité
d. Tap Continue installing camera.
3. Review the camera information and tap Continue Installation.
4. Review the Radar Zoning tips and tap Continue.
NOTE: Cameras set to use Performance Mode can disregard the radar requirements.
5. Review the Helpful Tips and tap Continue.
6. Input the necessary information:
a. Tap to acknowledge that the distance 'B' is 55 feet. Use the sliders to enter the distances of 'A' and
'C' obtained in
b. Use the sliders to enter the distances of 'A' and 'C' obtained in
c. Tap Continue.
7. Observe the Pre-Installation Reminder and tap Next.
8. Tap Continue Full Installation. Then, go to the section for the power option selected and perform
one of the following actions:
●
If Internal Battery Only was selected, go to
●
If Solar Panel was selected, go to
●
If AC 120v External Power was selected, go to
●
If DC 12v External Power was selected, go to
3.3
Solar Panel Installation
The Solar Panels can be mounted to a pole with the Metal Band Straps, or to a surface with the Lag Bolts.
Before installation, the Solar Panel Batteries must be fully charged.
Figure 13: Single Solar Panel Deployment
Scouting the Mounting
Location.
Solar Panel
Chapter 3: Hardware Installation
Scouting the Mounting
Camera
Installation.
Installation.
Installing AC
Power.
Installing DC
Power.
MN010089A01-AH
Location.
53
Publicité
