Publicité
Table 2: L6Q Overview Description
Number
1
2
3
4
5
6
7
L6Q Installation Video Tutorial
To view a video tutorial of the L6Q Camera and Solar Panel installation process, see
Panel
Installation.
1.1
Installation Site Requirements
Some locations may require permits or approval for installation. Potential installation sites should be scouted
ahead of time to identify the camera mounting location, available power options, and site characteristics. The
site characteristics must meet the performance criteria of the camera for proper operation.
The L6Q camera offers two power modes that affect where the camera can be installed and the kind of traffic
that it can monitor.
Performance Mode
Performance Mode uses more power than Eco Mode by always keeping the camera on, and constantly
searching for plates in the field of view. This mode consumes more battery, but increases capture rates,
captures bi-directional traffic, and allows for camera installation at intersections.
Eco Mode
Eco Mode uses less power than Performance Mode by holding the camera in a lower-power state until a
detection is made, before triggering capture. This mode extends battery life, and while adequate for most
scenarios, lacks the benefits of Performance Mode.
Table 3: Site Characteristics and Camera Requirements
Characteristic
Number of Lanes
Speed of Traffic
Description
Shroud
Camera
Mounting Bracket
Power/Multi-function Button
Charging Port Door
Battery Tray
Camera Batteries
Requirements (Eco Mode)
Up to two lanes of single-direc-
tion traffic:
●
Single lane
●
Two lanes, same direction
Light to moderate volume vehi-
cle traffic:
●
10 to 75 mph
●
Constant traffic flow
MN010089A01-AH
Chapter 1: L6Q Camera System Overview
L6Q Camera and Solar
Requirements (Performance
Mode)
Up to two lanes of bi-directional
traffic:
●
Single lane
●
Two lanes, same direction or
both directions
Light to moderate volume vehi-
cle traffic:
●
1 to 90 mph
13
Publicité
