Publicité
MN010089A01-AH
Chapter 3: Hardware Installation
Line A is the distance from the camera to the road center line. Line B is the distance from the camera
to a point on the roadside next to the estimated capture point.
NOTE: The distance from the capture point to the point on the roadside is equal to the distance
of line A.
5. Measure the height of the camera from the ground to obtain distance C.
3.2
Starting the Installation Process in Mobile
Companion
Follow the on-screen installation process in the mobile application.
Prerequisites: To begin hardware installation, ensure that the following conditions are met:
●
The Pre-installation and Location Scouting have been performed.
●
The installer is at the installation site.
●
An Agency Manager or Site Manager account is logged in to the Mobile Companion application.
Obtain:
●
L6Q Installation Kit
●
Required Components and Tools for this installation
●
Optional Add-ons for this installation
Procedure:
1. Reconnect the External Antenna to the upper port on the back of the camera.
2. Resume the installation process for the camera being installed in the Mobile Companion application.
a. Open the mobile application.
b. Tap Cameras.
c. Tap the camera that is being installed.
52
Publicité
