Publicité
MN010089A01-AH
Chapter 2: Pre-Installation
Number
2
3
4
5
6
40
Option
Camera Name
System Name
Last Detection
Operation Mode
Update Location
Description
If the aiming accuracy of the
camera is detected to be low,
tapping Re-aim camera... be-
gins the aiming process.
If installation for the camera was
started and then paused, tapping
Continue Installation Now re-
sumes the installation process
from the last completed step.
Camera names are searchable
in VehicleManager and Client-
Portal and can be modified.
System Names are permanent
camera identifiers linked to each
Camera Name used for the cam-
era. When searching with a Sys-
tem Name in VehicleManager or
ClientPortal, detections from all
linked Camera Names appear in
the results.
A list of the most recent detec-
tions made by the camera.
Toggles between Performance
Mode and Eco Mode.
●
Performance Mode uses
more power than Eco Mode
by always keeping the cam-
era on, and constantly
searching for plates in the
field of view. Performance
Mode mode consumes more
battery, but increases cap-
ture rates, captures bi-direc-
tional traffic, and allows for
camera installation at inter-
sections.
●
Eco Mode uses less pow-
er than Performance Mode
by holding the camera in a
lower-power state until a de-
tection is made, before trig-
gering capture. Eco Mode
mode extends battery life,
and while adequate for most
scenarios, lacks the benefits
of Performance Mode.
Opens the Location map to
change the address and aiming
direction of the installed camera.
Publicité
