Publicité
MN010089A01-AH
Chapter 2: Pre-Installation
●
Windermere HOA West @ Ashwell Ln.
●
5th St Garage, Entrance.
b. Tap to select Deployment Information.
a. Tap to select the Network for the camera to use, Wi-Fi or LTE.
13. Optional: Tap Change to set the address and position of the camera in the Set Camera Location
screen.
a. Enter a partial or full address in the address field to move the map to the desired area.
b. Tap and drag the map to position the camera.
c. Tap and drag the square to set the direction for the installed camera to face.
d. Tap Set Location.
14. Tap Next.
15. Perform one the following options:
Option
If the Wi-Fi Network
option was selected,
If the LTE Network
option was selected,
16. Select one of the four power options:
●
If the installation does not use an external power source, tap Internal Battery Only.
●
If the installation uses a solar deployment, tap Solar Panel.
●
If the installation uses the 120 V AC Power Adapter, tap AC 120v External Power.
●
If the installation uses the 12 V DC Power Cable, tap DC 12v External Power.
17. Observe the pre-installation checklist and ladder safety information, and tap Continue`.
48
Actions
a. Select the local Wi-Fi network SSID to connect to.
b. Enter the Wi-Fi network's password.
c. Tap Next.
a. Select the SIM card that is inserted into the camera:
●
Motorola Solutions SIM
●
Non-Motorola Solutions SIM
b. If Non-Motorola Solutions is selected, select the service provider that
issued the SIM card.
c. Tap Next.
Publicité
