Publicité
MN010089A01-AH
Chapter 2: Pre-Installation
8. Turn on the camera:
a. Press the power button for 1 second.
The camera requires about 20 seconds to boot up, during which the green LED rapidly blinks.
Once the camera is ready and turned on, the green LED illuminates.
b. Tap Next.
Figure 10: Camera Power Button
9. Activate pairing mode on the camera.
a. Press the Power Button for one second and Wait a few seconds for pairing mode to activate until
the pairing mode is active and the LED Status Indicator blinks, alternating between amber and
green.
b. Tap Continue.
46
Publicité
