Publicité
Instructions for use for the user
1. Start all functions that are to be switched on with the user program with the
preferred intensity.
2. Turn the function selector 2 to position H (user program).
► The user symbol lights up.
3. Use the intensity selector 3 to select which number (1–5) under which the
new user program is to be saved.
4. Hold down the intensity selector 3 for three seconds (long press).
► The intensity selector flashes.
► The settings are stored in the selected user program.
Example
User
Temperature
program
2
12. The Eco-function
The ECO function allows you to save energy in breaks between sauna sessions.
When the ECO function is activated, the connected devices run with reduced
power. You can choose between a 20, 40 or 60-minute sauna break.
The sauna heater and the vaporizer are switched on again before the end of the
break. In this way the preset temperature and preset humidity are reached again
at the end of the sauna break.
Perform the following steps to activate the Eco-function:
1. Turn the function selector 2 to position I (eco-function).
► The Eco symbol lights up.
2. Use the intensity selector 3 to set the preferred duration of the break.
● E20 stands for a 20-minute sauna break.
● E40 stands for a 40-minute sauna break.
● E60 stands for a 60-minute sauna break.
3. Press the intensity selector 3.
► The intensity selector 3 lights up.
► Additional display 1 displays the number of minutes until the sauna
heater is to be switched on in order to reach the preset temperature
before the end of the sauna break.
Humidity
°C
%
45
55
Auxiliary
Light
output
%
0
50
p. 42/48
Operat-
Fan
ing time
%
Hrs
0
3
Publicité
