Publicité
Place the logs in the firebox at a distance apart as shown in Figure 6. Place the largest at the
bottom and the smallest at the top, or vertically in the case of tall, narrow fireboxes. Place the
firelighter module above the pile, with the first logs in the module at right angles to the pile of wood.
FIRE LIGHTER MODULE This firelighter module replaces a paper or cardboard firelighter.
Prepare four 20 cm long logs with a cross-section of 3 cm by 3 cm Image 6. Cross the four logs
and place them at right angles to the top of the wood pile, with the fire starter (wood fiber
impregnated with wax, for example) in the middle. The fire can be lit with a match. If you wish, you
can use thinner pieces of wood. In this case, you will need a larger quantity.
Keep the flue gas valve and combustion air regulator open.
After lighting the fire, leave the combustion air regulator open in the position indicated in the
TECHNICAL DESCRIPTION section.
FUEL
Wood
IMPORTANT:
•
do not add extra wood between one full load and the next.
•
do not smother the fire by closing air inlets.
•
Regular cleaning by a chimney sweep reduces fine particle emissions.
PRIMARY Air
PRE-ADJUSTED
EN
SECONDARY Air
PRE-ADJUSTED
Publicité
