Publicité
without extractor hoods, type B gas appliances, heat pumps or other appliances which,
when operating at the same time, can create a negative pressure in the room.
-
Make sure that the flue and pipes to which the appliance will be connected are suitable for
its operation.
It is FORBIDDEN to connect several appliances to the same chimney.
•
The diameter of the chimney connection opening must correspond at least to the diameter
of the flue pipe. The opening must be fitted with a wall connector for inserting the exhaust
pipe and a rosette.
•
The installation must be suitable and must allow the product and the flue to be cleaned and
maintained.
Sannover accepts no liability for damage caused by the system to property and/or persons.
Furthermore, it is not responsible for any product modified without authorization, and
certainly not for the use of non-original spare parts.
Your local chimney sweep should be informed of the installation of the appliance so that he can
check that it is correctly connected to the chimney.
EN
Publicité
