Analytical Test Report
Client:
PFS-TECO
11785 SE Hwy 212, Ste 305
Clackamas, OR 97015
Attention:
Sebastian Button
PO No:
Sample Details
Sample Log No:
Sample Designation:
Sample Recognized As:
Test Results
Moisture Total
Ash
Volatile Matter
Fixed Carbon by Difference
Sulfur
SO₂
Net Cal. Value at Const. Pressure
Gross Cal. Value at Const. Vol.
Carbon
Hydrogen*
Nitrogen
Oxygen*
*Note: As received values do not include hydrogen and oxygen in the total moisture.
Chlorine
Fluorine
Mercury
Bulk Density
Fines (Less than 1/8")
Durability Index
Sample Above 1.50"
Maximum Length (Single Pellet)
Diameter, Range
Diameter, Average
Stated Bag Weight
Actual Bag Weight
Comments:
Accreditation #60243
W224-0189-01
Lignetics Pellets (Mill # 16036)
Wood Pellets
METHOD
ASTM E871
ASTM D1102
ASTM D3175
ASTM D3172
ASTM D4239
Calculated
ISO 1928
ASTM E711
ASTM D5373
ASTM D5373
ASTM D5373
ASTM D3176
ASTM D6721
ASTM D3761
ASTM D6722
ASTM E873
TPT CH-P-06
Kansas State
TPT CH-P-06
TPT CH-P-06
TPT CH-P-05
TPT CH-P-05
TPT CH-P-01
TPT CH-P-01
Results issued on this report only reflect the analysis of the sample submitted. Our reports and letters are
for the exclusive and confidential use of our clients and may not be reproduced, except in their entirety,
without the written approval of Twin Ports Testing. Twin Ports Testing Laboratory is accredited to the
ISO/IEC 17025:2017 standard by PJLA.
Twin Ports Testing, Inc.
1301 North 3rd Street
Superior, WI 54880
p:
715-392-7114
p:
800-373-2562
f:
715-392-7163
www.twinportstesting.com
Report No:
Issue No:
Signed:
Date of Issue:
THIS DOCUMENT SHALL NOT BE REPRODUCED EXCEPT IN FULL
Sample Date:
Sample Time:
Arrival Date:
UNITS
wt. %
wt. %
wt. %
wt. %
wt. %
lb/mmbtu
GJ/tonne
Btu/lb
wt. %
wt. %
wt. %
wt. %
mg/kg
mg/kg
mg/kg
3
lbs/ft
wt.%
PDI
wt.%
inch
inch
inch
lbs
lbs
USR:W224-0189-01
1
Katy Jahr
Chemistry Lab Supervisor
5/13/2024
4/26/2024
MOISTURE
FREE
RECEIVED
0.17
80.51
78.82
19.31
18.91
0.070
0.069
0.163
18.71
18.27
8627
8445
49.48
48.44
6.22
<
0.20
<
>
43.86
>
42.94
to
AS
2.10
0.17
6.09
0.20