Publicité
Your pellet stove has been approved for installation in the USA and Canada. It may also be installed in a manufactured or
mobile home. This manual describes the installation and operation of the Comfort Glow, CGPS2100, 5770 wood heater.
This heater meets the 2020 US Environmental Protection Agency's wood pellet emissions limits for wood heaters sold
after May 15, 2020. Under specific test conditions this heater has been shown to deliver heat at rates ranging from
10,300 to 23,449 Btu/hr. This heater achieved a particulate emissions rate of 1.1 g/hr and an efficiency of 78%.
Heating Specifications
Fuel Burn Rate* (lowest setting)
Burn Time (lowest setting)
Hopper Capacity
Electrical Specifications
Electrical Rating
Watts (operational)
Watts (igniter running)
Dimensions
Height X Width X Depth
Weight
IT IS AGAINST FEDERAL REGULATIONS TO OPERATE THIS WOOD HEATER IN A MANNER INCONSISTENT WITH THE
1.5 lbs./hr. (0.5 kg/hr)
40 hrs. (approximate)
* up to 60 lbs. (27kg)
110-120 Volts, 60 HZ, 3.0 Amps
180
346
44.5" (1130mm) X 23" (584mm) X 23.5" (597mm)
245 lbs. (111.1kg)
WARNING:
OPERATING INSTRUCTIONS IN THE OWNER'S MANUAL.
SPECIFICATIONS
* Pellet size may affect the actual rate of fuel feed, burn
times, and hopper capacity. Fuel feed rates may vary by as
much as 20%. Use PFI listed fuel for best results.
2
Publicité
