Publicité
Project # 24-284
Model: 5770E
Appliance Description
Model(s): 5770E
Appliance Type: Pellet-Fired Room Heater
Additional Models: The 5770E is available with alternate branding as the AP5770E,
VG5770E, US5770E, KP5770E, and KP5770E-W, all of which share a certification label.
Three additional model variants, labeled uniquely, are available, the CGPS2100,
BHPS30, and DH3000. All of these models are differentiated for branding purposes only,
and are identical in all respects that may affect emissions performance to the 5770E.
Air Introduction System: A variable speed combustion fan forces air into the firebox
through holes in the bottom of the firepot.
Combustion Control: A control panel on the top of the unit is used to select burn rates,
which are varied by automatic modulation of the combustion fan and feed system. An
automatically controlled distribution bower is also installed.
Fueling System: An inclined auger driven by a gear motor, meters pellets through a drop
tube (over feed) to a fire pot in the firebox.
Baffles: N/A
Flue Outlet: Venting is through a 3" diameter steel pipe, which exits through the back of
the unit.
Appliance Dimensions
5770E Dimensions
Height
Width
Depth
Weight
40"
20"
19.5"
210 lb
Appliance design drawings can be found in Appendix D submitted with the CBI copy of
this report.
Page | 10
Publicité
