Publicité
Report and Certificate of Calibration
Report #:
Customer Name:
Customer Address:
City:
Contact:
Service Address:
LP-00397 | Gage Block Set | Mitutoyo | SN: 509020 | Cal: 12/28/2022 | Due: 12/28/2024 | Vendor: BHD Test and Measurement | Report #: 99826
LP-01346 | Thermo-Hygrometer | Comark | SN: 06210350198 | Cal: 02/17/2023 | Due: 02/28/2024 | Vendor: Cal-Cert | Range: 122 °F 95 %RH | Report #: 28026-67215-4239
Calibration Date:
Calibration Due Date:
Calibration Frequency:
Manufacturer:
Type:
Model Number:
Serial #:
Capacity:
Resolution:
Instrument Range:
Remarks:
We sincerely thank you for your business. Please call us at 503-654-9620 for all your sales and calibration needs.
This certificate is hereby issued that the above instrument was tested for accuracy with calibrated standards traceable to the National Institute of Standards
and Technology (NIST). The information provided on this form complies with the data gathering and reporting requirements of ISO/IEC 17025 and
ANSI/NCSL Z540.1, and meets the requirements of all applicable references and Cal-Cert procedures listed above.
Any stated measurement uncertainty includes the uncertainty of the Calibration standards used, combined with the uncertainty of the measurement process
using the RSS method with a k=2 for an approximate 95% level of confidence. The calibration process meets or exceeds a ratio of 4:1 unless otherwise
stated.
All tolerances were derived from the applicable standards and pass/fail determination is based on those tolerances. The customer determined any
recommended due dates indicated on the certificate.
This report shall not be reproduced except in full, without written approval from Cal-Cert.
Service Engineer:
Technical Manager:
Micrometer CF-010-01
Page: 1 of 1
32664-227238-5
PFS TECO
11785 SE Highway 212, Suite 305
Clackamas
John Steinert
5777 SE International Way
Calibration Standards
Instrument Data
January 31, 2024
January 31, 2025
12 Months
Dwyer
Micrometer
Unknown
Unknown
1 Inches
0.001 Inches
1.000 Inches
Calibration
As Found
Standard
Inches
Inches
0.000
0.000
0.200
0.200
0.400
0.400
0.600
0.600
0.800
0.800
1.000
1.000
Cleaning and preventative maintenance were performed as part of this service.
Cal-Cert is accredited by A2LA under Calibration Laboratory Code #4986.01.
A2LA is recognized under the ILAC mutual recognition agreement (MRA).
Cameron Walling
Marshall Doyle
Copyright 2013 Cal-Cert. All rights reserved.
Customer PO#: 1107
State: OR
Milwaukie, OR 97222
Reference:
Cal-Cert Procedure:
Indicating System:
Temperature:
Humidity:
Asset #:
Service Location:
As Found:
As Left:
Range Resolution:
As Left
As Left
Reading 1
Reading 2
Inches
Inches
0.000
0.000
0.200
0.200
0.400
0.400
0.600
0.600
0.800
0.800
1.000
1.000
Date:
Signature:
Revision 17
Zip: 97015
ASME B89.1.13-2013
CP-010
Vernier
67 °F
39% RH
#217
Cal-Cert Lab
PASS
PASS
0.001 Inches
Expanded
Tolerance ±
Uncertainty
Inches
Inches
0.001
0.0006
0.001
0.0006
0.001
0.0006
0.001
0.0006
0.001
0.0006
0.001
0.0006
January 31, 2024
9/19/2022
Publicité
