* Many factors may cause the unit to drift out of calibration before the recommended due date. Any reported error is the absolute value between the reference and the unit.
Remarks:
Uncertainties include the effects of the unit.
Data is provided for your determination of acceptability. Received/returned without accessories.
Std ID Manufacturer
484A Rice Lake
503A Rice Lake
550A And (A&D) Co.
723A Rice Lake
Parameter
Measurement Description
Before/After
M a s s
Raw Data
This instrument has been calibrated in accordance with the JJ Calibrations Quality Assurance Manual and is traceable to either the SI or to National Institute of
Standards and Technology (NIST). The quality system and this certificate are in compliance with ANSI/NCSL Z540-1-1994, ISO/IEC 17025-2017, ISO
10012-1, the ISO 9000 family and QS 9000. The expanded uncertainties of measurements for this calibration are based upon 95% (2 sigma) confidence limits.
Unless stated in the comments, certificates reflect the "Simple Acceptance Rule" as specified by JCGM 106:2012. Unless otherwise stated, a test accuracy ratio
(TAR) of 4:1, if achievable, is maintained. The results reported herein apply only to the calibration of the item described above. This report may not be
Reviewer
Certificate: 743892
743892
Model
1kg-10kg (Class ASTM 1)
1mg-200g (Class 0)
HP-30K
1mg-200g (Class 0)
Range
Unit
Reference
g
4535.92370000
reproduced, except in full, without written approval of JJ Calibrations.