Publicité
Your pellet stove has been approved for installation in the USA and Canada. It may also be installed in a manufactured
or mobile home. This manual describes the installation and operation of the USSC, 5770E wood heater. This heater
meets the 2020 US Environmental Protection Agency's wood pellet emissions limits for wood heaters sold after May
15, 2020. Under specific test conditions this heater has been shown to deliver heat at rates ranging from 10,300 to
23,449 Btu/hr. This heater achieved a particulate emissions rate of 1.1 g/hr and an efficiency of 78%.
Heating Specifications
Fuel Burn Rate* (lowest setting) 1.5 lbs./hr. (0.5 kg/hr) * Pellet size may affect the actual rate of fuel feed, burn
Burn Time (lowest setting)
Hopper Capacity
Electrical Specifications
Electrical Rating
Watts (operational)
Watts (igniter running)
Dimensions
Height X Width X Depth
Weight
IT IS AGAINST FEDERAL REGULATIONS TO OPERATE THIS WOOD HEATER IN A MANNER INCONSISTENT
WITH THE OPERATING INSTRUCTIONS IN THE OWNER'S MANUAL.
Note: Register your product by using your smart
phone with the QR code. Save your receipts with
your records for any warranty claims.
You can also register your product online at
www.usstove.com/support/product-registration
OR by downloading the US Stove Company app
available for iOS and Android.
© 2024 United States Stove Company
40 hrs. (approximate)
times and hopper capacity. Fuel feed rates may vary by as
much as 20%. Use PFI listed fuel for best results.
*up to 60 lbs. (27kg)
110-120 Volts, 60 HZ, 3.0 Amps
180
346
44.5" (1130mm) X 23" (584mm) X 23.5" (597mm)
245 lbs. (111.1kg)
WARNING:
SPECIFICATIONS
For Customer Service, please call:
1-800-750-2723 Ext 5050 or;
Text to 423-301-5624 or;
Email us at:
/
customerservice@usstove.com
2
Publicité
