Publicité
JMA
JMA
BERNA BIT
BERNA BIT
2. SAFETY MEASURES
2.1 REGULATIONS
The Berna Bit key cutting machine and its safety features
are compliant with Directive 2006/42 EC on Machinery.
This manual cites all the safety regulations that the user
must respect when installing and operating the machine.
Failure to follow these instructions may compromise the
safety conditions provided for during design and testing.
When used for the purpose for which they have been
designed, all machines bearing the CE mark are compliant
with EU Directive 2006/42 EC on Machinery.
1.
The machine operator must know and
follow the instructions provided in this
manual.
2.2 SAFETY FEATURES
The Berna Bit key cutting machine is fitted with safety and
other protective features that define the user operation area
in order to guarantee their safety.
2.2.1 User Protection
- Earthing connection.
- CIRCUIT BREAKER. This device stops the flow of electricity
in the event of the following: The circuit breaker prevents
the cutter from suddenly moving again if electrical power
unexpectedly returns after a sudden power supply failure
that stopped cutter rotation, thereby preventing any risk
this may pose to user integrity. If this happens, the machine
must be manually switched off and on again using the
power switch.
- Anti-swarf guard shield. The operator must still wear safety
goggles even though this device is present.
KEY CUTTING MACHINE
2.2.2 Personal Protective Equipment
When operating or maintaining the Berna Bit machine, users
must wear the following personal protective equipment:
- CLOTHING: Those responsible for maintaining and
operating any key cutting machine should wear protective
clothing that meets all the basic safety requirements
currently in effect. On wet floors, users should wear safety
shoes with a non-slip sole.
- SAFETY GOGGLES: The operator should wear safety
goggles over the eyes during the duplication stages of
operation.
2.2.3 Safety Signs and Symbols
The Berna Bit key cutting machine uses the following safety
signs and symbols:
1.
2.
3.
4.
5.
6.
Safety goggles must be worn
Read the instruction manual before
operating the machine
WARNING! Hazardous operation
WARNING! Rotating tool
WARNING! Electrical voltage
Earthing connection
Publicité
