Publicité
JMA
JMA
BERNA BIT
BERNA BIT
5.2.3 Copying Flat or Locker Keys
See Figure 8
- Secure the keys in side 3 of the clamps.
- Turn the machine on and, while holding the carriage
assembly by the motion control lever (8), BERNA BIT the keys
towards the cutter (1) and tracer (2).
- Push the handle (6) back inwards to disable clamp carriage
assembly rotation, previously setting clamp carriage
assembly rotation to an intermediate position.
- We recommend working slowly, without forcing the cutter.
- If the duplication process produced any burrs on the copy,
these can be reBERNA BITd using the brush that is provided
with the machine for this purpose.
KEY CUTTING MACHINE
Publicité
