Publicité
• Report: To save the number of current data streams.
• Record: To record the diagnostic data for further analysis.
: To view single data steam displayed in waveform. Tap "
•
The following page will appear:
Tap "Min/Max" to define the maximum/minimum value. Once the value goes
beyond the specified value, the data will be shown in red.
Tap "<" on the right side of the screen. The following page will appear:
You can select specific data stream options to be viewed on the left.
Note: A maximum of 4 data streams can be displayed in this module.
26
".
Publicité
