Publicité
6
Fall Clearance Charts
6.1
V-SHOCK EDGE SRL - Leading Edge Fall Clearance Charts
20 ft V-SHOCK EDGE SRL:
20 ft / 6 m Length
Use: Leading edge applications
Capacity: ≤ 310 lb (141 kg)
(A) Clearance values shown are based on 0 ft (0 m)
anchorage setback from the leading edge.
Anchorage connector may be used at setback
distance of 0 ft (0 m)*** from the leading edge or as
far back as required. Refer to the charts below for
clearances with setback.
NOTE: Clearance chart anchorage location for
illustrative purposes only.
Use: Clearances for Leading Edge with Setback Applications Capacity: ≤ 310 lb (141 kg)
C - Setback
from Leading
Edge (ft)
C - Setback
from Leading
Edge (m)
US
30 ft V-SHOCK EDGE SRL:
30 ft / 10 m Length
B - Distance from Center (ft)
B - Distance from Center (m)
V-SHOCK® EDGE SRL
6 Fall Clearance Charts
50 ft V-SHOCK EDGE SRL:
50 ft / 15 m Length
ILLUSTRATION NOT TO SCALE
WARNING!
*** Ensure that the setback distance
meets requirements in anchorage
connector manual and that the set-up
does not allow the housing unit or top
connector of the SRL to contact
leading edge in the event of a fall.
Failure to follow this warning can
result in serious personal injury or
death.
12
Publicité
