Publicité
STORAGE
TRANSPORT AND STORAGE
Preparation for storage
Note: Dispose of gasoline in an environmentally friendly way!
•
For long-term storage, the fuel tank must be as empty as possible. Empty the fuel tank (9) with
a fuel suction pump (not included in the scope of delivery). To ensure that no gasoline remains
in the carburetor, any remaining gasoline in the carburetor must be drained. To do this, place
a suitable container (not included in the supply) under the carburetor and open the fuel drain
screw (41).
•
Change the oil at the end of each season. To do this, remove the used motor oil from a warm
engine and fill it with new oil.
•
Remove the spark plug. Fills approx. 30 ml of oil in the cylinder with an oil can (not included in
delivery). Slowly pull the starter cable (18) so that the oil covers the inside of the cylinder.
•
Replace the spark plug.
•
Open the star retaining screws (6) and fold the device.
•
Before transporting and/or storing the pressure washer, make sure it cools completely.
•
Transport the machine with the fuel switch off, in addition to keeping it in vertical to prevent
fuel spills.
•
Store the device in a well-ventilated place or area.
•
Cover the machine to protect it. The machine is not weatherproof and should not be stored in
direct sunlight, high ambient temperatures, or in wet or very humid locations. Store the device
and its accessories in a dark, dry, frost-free place, out of the reach of children. The optimal
storage temperature is between 5 and 30 ºC.
DISPOSAL AND RECYLCING
•
Worn products are potentially recyclable and should not be disposed of in the regular trash.
Help us protect the environment and preserve natural resources.
•
Dispose of the device in an environmentally friendly way. Do not throw it away with the
household garbage. Its plastic and metal components can be separated and recycled. Take
this appliance to an approved recycling center (green dot).
•
The materials used in the packaging of the machine are recyclable: please dispose of them in
the appropriate container.
GUARANTEE
GREENCUT guarantees all products for a period of 3 years (valid for Europe).
The warranty is subject to the date of purchase taking into account the intended use of the product. As a condition
of the warranty, the original receipt must be presented indicating the date of purchase and its description as well as
the defective tool.
The warranty does not cover wear and tear due to normal use, especially on batteries, reels, blades, fasteners,
turbines, light sources, fan and drive belts, impellers, air filters and damage caused by improper use, especially non-
compliance with the operating and maintenance instructions.
The warranty will be void if repairs or modifications have been made by the consumer or others other than with
original GREENCUT spare parts or by any negligence on his part.
In the event of a justified warranty claim, we are authorized, at our discretion, to repair or replace the defective tool
free of charge. Further claims beyond this warranty shall not be valid.
81
EN - JET260X
Publicité
