Publicité
PRECAUTIONS FOR USE
USERS
•
This brushcutter is intended for domestic use only.
•
The machine is designed to be operated by adult users who have read and understood these instructions. Do
not allow minors and persons who do not understand these instructions to use the product.
•
Before using the product, familiarize yourself with the product. Make sure you know where all the controls
and safety devices are located and how to use them.
•
If you are an inexperienced user, we recommend that you practice doing simple jobs and, if possible, in the
company of an experienced person.
•
The user is responsible for accidents or hazards occurring to his property, himself and his property.
PERSONAL SAFETY
•
Use this pressure washer according to these instructions.
•
Make sure all hoses and connectors/accessories are properly installed and secure. Be alert and use common
sense when operating this machine. Never use the machine with defective protections or without safety
devices.
•
Do not operate the equipment in flammable or explosive environments, or where there may be liquids,
gases or flammable dust.
•
The high pressure jet produced by this machine is dangerous if used improperly.
•
Use extreme caution when cleaning vehicles and especially tires.
•
Do not direct the jet of this machine at objects that may have substances harmful to health.
•
Do not bring the high-pressure lance closer than 30 cm to the surface you want to clean.
•
Always hold the spear with both hands to prevent recoil.
•
Do not spray any liquid except water or soapy water. Do not spray solvents, fuels, any other flammable
liquid. Neither acidic nor alkaline.
•
Do not use this machine, or modify its controls, if any of its components are damaged.
•
Do not operate the machine without a source of liquid to vacuum.
•
Do not use this machine if you are tired, or after having ingested drugs, alcohol and/or medication.
•
Make sure all power supplies meet the voltage requirements of the equipment and that they are
disconnected before connecting the equipment.
•
Make sure the computer and power supply switches are in the off position.
•
Power off/OFF before connecting or moving the equipment.
•
If the motor is running but the machine's spray action will not be used for more than 2 minutes, turn off the
motor. Leaving the machine running without spraying for periods Prolonged use may damage the pump and/
or other components and will void the product warranty.
•
Dress appropriately. Do not wear loose clothing or jewelry that could get caught in the parts mobiles.
•
We recommend the use of: eye protection (safety glasses), hearing protection, hand protection (resistant,
non-slip gloves, foot protection (non-slip footwear).
SAFETY IN THE WORK AREA
•
Work areas must be clean and well lit.
•
Keep curious people, children or animals away while operating this machine.
•
Never direct the pressure jet towards people, animals, cars, glass, windows or any other element. Nor
towards public roads or areas where there could be traffic of people, animals and/or vehicles.
•
Exhaust gases, fuel vapors and oil contain carbon monoxide and dangerous chemicals.
•
Do not use this machine on unstable ceilings or surfaces.
•
Keep the work area clean and only work with sufficient lighting.
•
Remember that the machine operator is responsible for dangers and accidents caused to other people or
things. The manufacturer will in no case be responsible for damage caused by improper or incorrect use of
this machine.
USE OF FUELS
•
Gasoline and oil are dangerous. Do not inhale or ingest them. If you ingest fuel and/or oil, go to your
doctor quickly. If you come into contact with fuel or oil, clean yourself with plenty of soap and water as
soon as possible. If your eyes or skin feel irritated later, consult immediately with a doctor.
•
Fuel and oil are dangerous and highly flammable chemicals. If they become inflamed, put out the fire with a
dry powder extinguisher.
•
Do not spill fuel or smoke near the machine.
•
Always turn off the engine before refueling.
•
Always refuel in well-ventilated areas. And never with the engine running or hot. If you find a fuel
•
leak, do not start or run the engine until it has leaked repaired the leak.
•
Make sure the fuel cap is properly closed.
•
Fuel stored in the carburetor for long periods of time can cause hard starting and could also lead to more
repairs and maintenance being needed.
SAFETY IN MAINTENANCE, TRANSPORTATION AND STORAGE
•
Make sure that you connect the machine to a water source that has the flow rate of the machine.
•
Ensure that the water source to which you connect this machine is clean without impurities.
•
Carry out periodic maintenance of the machine. We recommend that the maintenance and repairs not
described in this manual are carried out by the Official Technical Service.
•
Replacement parts must be original from the manufacturer to help ensure the safety of the equipment.
•
Keep the handles of the machine dry and clean.
•
Always turn off the machine's engine before changing accessories or storing the machine.
•
Keep the machine and hoses in good working condition.
•
Operate the equipment only on solid, level surfaces. Do not hold or suspend the equipment from hoses or
other unstable media.
•
Keep this machine out of the reach of children.
•
Have the machine checked periodically by a qualified technician using only original spare parts. If you have
any questions, contact Technical Service.
•
Always unwind the hose completely from the gun to avoid damage to the hose due to machine vibrations.
•
Check that the tip of the lance where the nozzles are placed and the nozzles themselves are always clean
and free of foreign bodies.
67
EN - JET260X
Publicité
