Publicité
MAINTENANCE
Good maintenance will extend the useful life of the machine. Prolonged or constant use
may require more intensive maintenance to keep the machine functioning properly.
•
Turn off the device before doing any setup or maintenance work.
•
Remove the spark plug connector (31).
•
Before working on the device, set the motor switch to "0/Off" and remove the spark plug
connector.
•
Keep protective devices, air vents and motor casing as free as possible of dust and dirt
possible.
•
Clean the device with a dry cloth or blow with low pressure compressed air.
•
We recommend that you clean the device directly after each use. Clean the device
periodically with a damp cloth and some mild soap. Do not use chemical cleaning agents or
solvents. They could damage the plastic parts of the device. Make sure that no water gets
inside the device.
DANGER OF BURNING! DO NOT TOUCH HOT MUFFLERS, CYLINDERS OR COOLING FINS.
Turn off the device immediately and contact your customer service:
•
In case of unusual vibrations or noises.
•
If the motor appears overloaded or fails.
EACH
MAINTENANCE
USE
Oil level
Review
Oil change
Review
Air filter
Review
Spark plug
Supply tube
made out of fuel
Scape valve
Camera of
combustion
Slow motion
Bolts
Review
Deposit of fuel
Fuel filter
77
EACH
EACH
EACH
MONTH OR
3 MONTHS OR
6 MONTHS OR
12 MONTHS OR
20H USE
50H USE
100H USE
Carry out
Clean
Replace
Clean or
Replace
Review
Drain and clean
Clean or Replace
EN - JET260X
EACH
300H USE
Clean or
Replace
Replace
Review
Review
Publicité
