Publicité
EN
INITIAL CONTROLLER SETUP
SGC differential controllers are equipped with an innovative solution, which allows initial setup
of the controller in only two steps.
When you connect the controller to the power supply for the first time, the software version is
shown. Next, the first step appears on the screen.
STEP 1 - SET LANGUAGE
Using buttons
Press the button
If you cannot find the required language on the first screen, move to the following
screens by pressing the button
STEP 2 - SET HYDRAULIC SHEME
|
6
and
you select the required language.
to confirm the selected language.
After selecting the language, the controller requires
confirmation of the selection by pressing the
If you accidentally selected the wrong language, go back
to reset the language by pressing button
Next, you select a hydraulic scheme for the controller
function. Move between schemes by means of buttons
Confirm the selected scheme by pressing the
.
and
.
button.
.
button.
User and settings manual
Publicité
