Publicité
CONTROLLER PARAMETERS
EN
AND AUXILIARY TOOLS
Para-
Function
meter
P2.11
MINIMUM TEMPERATURE OF
SENSOR T6
P2.12
MAXIMUM TEMPERATURE OF
SENSOR T6
P2.17
EMERGENCY SHUTDOWN
TEMPERATURE FOR
COLLECTORS
P2.18
COLLECTOR'S FROST
PROTECTION TEMPERATURE
TABLE WITH DESCRIPTION OF PARAMETERS
Para-
Function
meter
P3.1
LEGIONELLA
P3.2
LEGIONELLA -
ACTIVATION DAY
LEGIONELLA -
P3.3
ACTIVATION TIME
P3.4
PRIMARY HEAT
SOURCE -
STANDBY AT MIN.
TEMPERATURE
PRIMARY
P3.5
HEAT SOURCE
- OPERATION
WITH RESPECT
OF COLLECTOR'S
TREND
PRIMARY HEAT
P3.6
SOURCE -
COLLECTOR'S
TREND TIME
|
26
Setting range
-30 ÷ 100 °C depends on selected scheme *
0 ÷ 200 °C
100 ÷ 280
°C
-30 ÷ 10 °C
Setting range
Activation of legionella function.
Setting of day when the legionella
protection should activate.
Setting of hour when the legionella
protection should activate.
Selection if primary heat source should
permanently heat the water to min.
temperature.
Selection if primary (controlled) heat source
should activate immediately or with delay if
the collectors have trend and tendency to
warm the water to requested temperature.
Setting of time in which we tolerate water
warming only with collectors. Primary heat
source will not be activated if the water can
be warmed (in setted time) only by means
of solar collectors.
Default value
depends on selected scheme *
depends on selected scheme *
depends on selected scheme *
Default value
0 - NO
1 - YES
1- MON
2- TUE
3- WEN
4- THU
5- FRI
6- SAT
7- SUN
0 ÷ 23 h
0- NO
1- YES, TIME
PROG.
2- ALWAYS
0 - NO
1 - YES
0 ÷ 1440 min
Service settings manual
Default
value
0
5
5
0
1
0
Publicité
