Publicité
MENU STRUCTURE
EN
AND DESCRIPTION
TEMPERATURE SETTINGS
In the menu "TEMPERATURE SETTINGS" you can set the set-point temperature for the sensors
shown.
By pressing buttons
window opens:
Sensor
location
Graphic
review
of settings
Set the set-point temperature with buttons
Exit settings with button
USER FUNCTIONS
User functions enable additional comfort and benefits when using the controller.
In menu, the following user functions are available:
ONE-TIME DOMESTIC HOT WATER WARMING
Use this function when you want to immediately turn on the d. h. w. warming.
By pressing buttons
. You leave settings by pressing the button
One-time d. h. w. warming is possible only by schemes with a liquid fuel boiler, heat
pump or electric heater.
|
16
,
and
Current value of set-point
temperature (analogue mode)
.
and
select function and activate it by pressing the button
you choose the required temperature, and a new
,
and confirm with button
.
Current value of
set-point temp.
(numeric mode)
Value of the last
confirmed setting
Default value
Setting range
.
User and settings manual
Publicité
