Publicité
EN
SERVICE PARAMETERS
Para-
Function
meter
S2.11 RESPECT
REQUESTED
TEMPERATURE OF
STORAGE TANK 2
S2.12 RESPECT
REQUESTED
TEMPERATURE OF
STORAGE TANK 3
S2.13 MIN. COLLECTOR
TEMPERATURE
S2.14 MIN. TEMP. OF AUX.
HEAT SOURCE Q1
S2.15 MIN. TEMP. OF AUX.
HEAT SOURCE Q2
S2.18 SENSOR T3
SUBSTITUTE
S2.19 SENSOR T4
SUBSTITUTE
S2.20 SENSOR T5
SUBSTITUTE
|
32
Setting range
We define whether storage tank
2 should be loaded (by means of
collectors) only to the set point
temperature.
With settings we define whether
storage tank 3 should be loaded (by
means of collectors) only to the set
point temperature.
We define whether and how the
minimum collector temperature is
considered.
We define whether and how the
minimum temperature of auxiliary heat
source Q1 is considered.
We define whether and how the
minimum temperature of auxiliary heat
source Q2 is considered.
Selection of substitute sensor to replace
the T3 sensor.
This setting is used when there is no
option to install or connect the sensor.
Selection of substitute sensor to replace
the T4 sensor.
This setting is used when there is no
option to install or connect the sensor.
Selection of substitute sensor to replace
the T5 sensor.
This setting is used when there is no
option to install or connect the sensor.
Default value
Default
value
0- NO
1
1- YES
0- NO
1
1- YES
0- NO
2
1- YES
2- YES, ONLY
SWITCH-ON
0- NO
1
1- YES
2- YES, ONLY
SWITCH-ON
0- NO
1
1- YES
2- YES, ONLY
SWITCH-ON
0- NO
0
1- SENSOR T1
2- SENSOR T2
0- NO
0
1- SENSOR T1
2- SENSOR T2
3- SENSOR T3
0- NO
0
1- SENSOR T1
2- SENSOR T2
3- SENSOR T3
4- SENSOR T4
Service settings manual
Publicité
