Publicité
By pressing buttons
A new window opens:
Graphic symbol
Factory
value
You change settings by pressing buttons
button
. You exit the settings by pressing button
The change of settings is carried out when you confirm it by pressing button
DATA OVERVIEW
In the menu "DATA OVERVIEW" there are icons to access the following data on controller
performance:
NUMERIC AND GRAPHIC REVIEW OF ACQUIRED ENERGY
There is an extract of acquired energy by years, months and weeks.
DIAGRAMS OF MEASURED TEMPERATURES FOR LAST WEEK
Graphic overview of temperature by day for each sensor.
Temperatures are recorded for last week.
DIAGRAMS OF MEASURED TEMPERATURES FOR CURRENT DAY
Detailed graphic overview of temperature in current day for each sensor. How often
are temperatures logged is set with parameter S1.5. Such temperature overview is
useful by analyse of heating system operation mode or by setup and service.
OUTPUT'S OPERATION TIME COUNTERS
Counters of controller's outputs operation time.
SPECIAL SERVICE DATA
Intended for diagnostics for technical service.
To overview graphs press buttons
Press button
Press buttons
By pressing the button
graph.
User and settings manual
MENU STRUCTURE
AND DESCRIPTION
,
and
you select and confirm required setting.
20
Current value of setting
to review the daily temperatures of selected sensor.
and
to move between days of selected sensor.
you can change the span of temperature review on the
80
and
and confirm by pressing
.
and
to move between sensors.
Current value of
setting
The last confirmed
value of setting
Setting
range
.
EN
|
23
Publicité
