Seltron SGC16H Mode D'emploi page 25

TABLE WITH DESCRIPTION OF PARAMETERS
Para- Function
meter
P1.1 SWITCH -ON DIFFERENCE 1
P1.2 SWITCH -OFF DIFFERENCE 1
P1.4 SWITCH -ON DIFFERENCE 2
P1.5 SWITCH -OFF DIFFERENCE 2
P1.9 HYSTERESIS FOR SENSOR T1
P1.10 HYSTERESIS FOR SENSOR T2
P1.11 HYSTERESIS FOR SENSOR T3
P1.12 HYSTERESIS FOR SENSOR T4
P1.13 HYSTERESIS FOR SENSOR T5
P1.14 HYSTERESIS FOR SENSOR T6
P1.17 HYSTERESIS FOR MINIMUM
TEMPERATURES
HYSTERESIS FOR MAXIMUM AND
P1.18
PROTECTION TEMPERATURES
TABLE WITH DESCRIPTION OF PARAMETERS
Para- Function
meter
P2.1 MINIMUM TEMPERATURE OF
SENSOR T1
P2.2 MAXIMUM TEMPERATURE OF
SENSOR T1
P2.3 MINIMUM TEMPERATURE OF
SENSOR T2
P2.4 MAXIMUM TEMPERATURE OF
SENSOR T2
P2.5 MINIMUM TEMPERATURE OF
SENSOR T3
P2.6 MAXIMUM TEMPERATURE OF
SENSOR T3
MINIMUM TEMPERATURE OF
P2.7
SENSOR T4
MAXIMUM TEMPERATURE OF
P2.8
SENSOR T4
MINIMUM TEMPERATURE OF
P2.9
SENSOR T5
P2.10 MAXIMUM TEMPERATURE OF
SENSOR T5
Service settings manual
CONTROLLER PARAMETERS
AND AUXILIARY TOOLS
Setting range Default value
3 ÷ 30 °C depends on selected scheme*
1 ÷ 20 °C depends on selected scheme *
3 ÷ 30 °C depends on selected scheme *
1 ÷ 20 °C depends on selected scheme *
1 ÷ 30 °C depends on selected scheme *
1 ÷ 30 °C depends on selected scheme *
1 ÷ 30 °C depends on selected scheme *
1 ÷ 30 °C depends on selected scheme *
1 ÷ 30 °C depends on selected scheme *
1 ÷ 30 °C depends on selected scheme *
1 ÷ 10 °C depends on selected scheme *
-15 ÷ -1 °C depends on selected scheme *
Setting range Default value
-30 ÷ 100 °C depends on selected scheme *
0 ÷ 200 °C depends on selected scheme *
-30 ÷ 100 °C depends on selected scheme *
0 ÷ 200 °C depends on selected scheme *
-30 ÷ 100 °C depends on selected scheme *
0 ÷ 200 °C depends on selected scheme *
-30 ÷ 100 °C depends on selected scheme *
0 ÷ 200 °C depends on selected scheme *
-30 ÷ 100 °C depends on selected scheme *
0 ÷ 200 °C depends on selected scheme *
EN
|
25